bonai@tilefrp.com

Contact:
+86 18931685668 | bonai@tilefrp.com
Add:
Gongcun,Dacheng country,Langfang City,Hebei Province China.
 

How to distinguish the pros and cons of PC sunshine board

How to distinguish the pros and cons of PC sunshine board
Different from other building materials, the quality of PC sunshine board, endurance board involves a very important point "warranty life". Of course, some other products will have three years of quality assurance, one year of quality assurance, although it is the business or manufacturers for product quality assurance, but PC plate quality assurance years obviously more long time, generally for five years, ten years, even manufacturers advertise 15 years of quality assurance. Among them, two very important questions in front of us, will some manufacturers will be shoddy? How do we distinguish the quality of a batch of PC board products?

As a consumer, if we do not have enough conditions to carry out a very professional PC plate test, we will have a better way to judge the quality of the plate and warranty life? Here, Xinhai sunshine board provides you with a few simple ways to identify.

First of all, if it is a transparent PC board, we can observe the transparency of the board, generally ten years of warranty PC endurance board can reach about 90% transmittance, sunlight board in about 80%, if the plate transmittance is low, that the polycarbonate particles used in the plate quality is poor, its quality assurance years will be reduced naturally.

Secondly, we can carefully observe whether the PC board has impurities, usually contains impurities of the board used polycarbonate raw materials mixed with different degrees of recycling old material, this kind of raw material production of PC solid endurance plate color will have a certain difference, PC sun board is also the color performance is not pure enough. Under normal circumstances, it is difficult to use the board produced by recycled materials for more than ten years, after a few years of sunlight exposure, there will be fracture.

Third point, transparent PC board warranty life, in addition to the use of the most important raw materials, there is another factor "UV coating"; Its main role is to prevent ultraviolet rays to destroy the composition of polycarbonate, so as to avoid PC board yellowing, aging. How to judge whether the surface of PC plate added UV layer? You can shine a strong light on the UV coated side, and the edge will appear a less pronounced blue, while the plate without UV will not change.

Fourth, look at the weight, generally good PC board, relatively speaking, because of the compactness of raw materials, the quality is heavier, pinch up harder, on the contrary, the texture is soft, the quality is light.

In general, from these four points, you can simply judge whether the quality of PC board in line with your purchase standards, I hope you in large quantities to buy the best from the formal channels to find brand manufacturers, avoid being cheated.

X
en_GBEnglish